Motion Pro 08-0066 Chain Press Tool Kit Fits 520 & 530 standard & O-ring chains

Motion Pro 08-0066 Chain Press Tool Kit Fits 520 & 530 standard & O-ring chains

Motion Pro

  • $54.99

Only 3 left!

 

MOTION PRO  08-0066

 

Chain Press Tool Kit

  • Fits 520 and 530 standard and O-ring chains




MOTION PRO CHAIN PRESS TOOL P/N 08-0066
 
This chain tool will press on the outer link plates of master links.
Fits size 520,525,530 and 532 chain only.
 
Before using apply a liberal amount of high quality grease on threads and the back of pad plates.
 
Usage: This tool is used to press on connecting link side plates. Desirable for newer type press fit
link side plates which cannot be installed by hand.
 
Other tools recommended by Motion Pro for complete chain repair.
1. # 08-0230(master link pliers)for master link clips.
 
General Instructions
 
1. Thread handle onto main press body
 
2. Install grooved pad plate into bottom of main body (stationary side)
 
2. Install the pad plate with two holes into the upper side of the press tool (Side with movable
hollow bolt ). At this time your plates should oppose each other so the plate with two
holes can allow the master link pins to move into the holes freely.
 
3. Install chain onto vehicle. Merge chain onto rear sprocket so you have a platform in
which to use the Chain Press Tool (it’s not necessary but makes installation easier).
 
4. Install connecting link from the inside of the sprocket. Insert the link so the pins
are pushed all the way through. And lightly install connecting link plate. Do not
forget to install any O-rings (if you have an O-ring chain) prior to installing the
plate.
 
5. Now , slowly screw the body bolt (hollow bolt) with the pad that has two holes down
on to the press fit plate until the plate is seated against the chain face and the link
fitment is snug. Caution!! Do not over tighten chain link for it will create binding and may
cause chain wear.
 
6. After connecting link plate is installed to the link. Use Motion Pro master link pliers for clip type master links to install the clip. The open end of the clip always faces away from the drive direction. Or use the Motion Pro chain riveting tool #08-0058 to stake the master link
plate into place.

Return/Exchange Policy - If for any reason you aren't happy with your purchase you may return or exchange the product within 30 days of the delivery date. The product must be unused, in re-sellable condition and include all original packaging and/or tags. Shipping costs for all returns or exchanges are paid at the buyers expense unless a mistake was made on our part.   If you have received the wrong item please contact us immediately. We will fix the problem by shipping a replacement.

International Buyers – Import duties, taxes, customs fees, VAT, GST and other associated import fees are not included in the item price or shipping cost.
These fees and charges are the buyer's responsibility.
These fees are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.
We cannot mark items as "gift" or change export value.


PO BOX - If you have a PO BOX, please provide BOTH PO Box and physical street address at checkout.